Aluminum plate is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum plate or aluminum sheet, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum plate is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum plate or aluminum sheet, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum coil is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum coil, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum coil is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum coil, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum tubes can have one or more closed through-holes, uniform wall thickness, cross-section, and are delivered in straight lines or rolls. Widely used in automobile, ship, aerospace, aviation, electrical appliances, agriculture, electromechanical, household and other industries.

Aluminum tubes can have one or more closed through-holes, uniform wall thickness, cross-section, and are delivered in straight lines or rolls. Widely used in automobile, ship, aerospace, aviation, electrical appliances, agriculture, electromechanical, household and other industries.

Aluminum flat bar refers to steel 12-300mm wide and 3-60mm thick, rectangular in section and slightly blunt edge. It can also be used as blank for welded pipes and thin slabs for stacking sheets. The sides are vertical, and the water chestnut horns are clear. The second vertical rolling in the finishing rolling has good verticality on both sides, clear angles, and good surface quality of the edges.

Angle aluminum is two sides perpendicular to each other intersecting aluminum profile, it is L-shaped, the side length from ten mm to one or two hundred mm, thickness from one millimeter to tens of millimeters, angle aluminum can be divided into equilateral angle aluminum and unequal corner aluminum, equal angle aluminum is two sides are equal length aluminum profiles.

Aluminum plate is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum plate or aluminum sheet, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum tubes can have one or more closed through-holes, uniform wall thickness, cross-section, and are delivered in straight lines or rolls. Widely used in automobile, ship, aerospace, aviation, electrical appliances, agriculture, electromechanical, household and other industries.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

The raw material of aluminum strip/aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, which is rolled into thin aluminum coils of different thicknesses and widths by a cold rolling mill. According to the purpose, the aluminum strip is longitudinally cut into aluminum strips of different widths by a longitudinal shear machine.

Aluminum plate is the thickness of 0.2mm to 500mm below, width of 200mm or more, length of less than 16m aluminum material is called aluminum plate or aluminum sheet, 0.2mm or less for aluminum, 200mm width within the row or strip (of course, with the advancement of large equipment, the widest can be 600mm aluminum plate is more).

Aluminum tubes can have one or more closed through-holes, uniform wall thickness, cross-section, and are delivered in straight lines or rolls. Widely used in automobile, ship, aerospace, aviation, electrical appliances, agriculture, electromechanical, household and other industries.